Sunfire X4150 Drivers For Mac

Maybe you are looking for. As a number of other people have posted here, I've encountered some problems with the iOS 7.1.2 update on my iPhone. Unlike most of the others, I've tried a number of possible solutions before resorting to asking here, and I have details of my effort. I'm using a Mac desktop and it/my itunes will not recognize my ipod touch.

I have resent my ipod and have also done all the suggested things on the apple website and still it is not being recognized, I do not know what else I can do. My macbook will. Forgive me because I'm in a state of confusion over all the options that now exist called iCloud, and iTunes sync and iPhone & iPad setting to do this, that, and the other thing.

I have an iPhone & iPad. On the iPad (Apple) calendar, opened this morn. We recently created a training video that is about 4-5 minutes in length. It is a simulation of our software package and includes mouse movements and clicks with some voice narration in the background. The filesize is already nearing 80Meg! We are no.

Every time my computer is re-started (either from restart or from being off) the preferences do not hold and the icons and shuffled to a different place on the desktop. This has been going on since I installed my new MacPro in December but I can't st.

Sun Netra X4250 ILOM update = unable to change iLOM ip to the factory def This is about Sun Netra X4250 Server ILOM firmware update, using the update provided here: ILOM updated to Version 3.0.3.30 (ILOM) build 44534 We were able to upgrade the iLOM firmware from 2.0.2.6 to 3.0.3.30. After the upgrade, we were unable to change the iLOM ip to the factory default ip for hardware configuration. The problem was that after changing the iLOM ip with factory default ip (192.168.0.10) and saving the changes, the ip was reverted to earlier assigned ip i.e. To check this, we downgraded the iLOM firmware back to 2.0.2.6 and rechecked the procedure. The iLOM ip was successfully changed to the factory default ip. So, we suspect that the problem could be due to the new firmware.

Hp Drivers For Mac

This is about Sun Netra X4250 Server ILOM firmware update, using the update provided here: ILOM updated to Version 3.0.3.30 (ILOM) build 44534 We were able to upgrade the iLOM firmware from 2.0.2.6 to 3.0.3.30. After the upgrade, we were unable to change the iLOM ip to the factory default ip for hardware configuration. The problem was that after changing the iLOM ip with factory default ip (192.168.0.10) and saving the changes, the ip was reverted to earlier assigned ip i.e.

To check this, we downgraded the iLOM firmware back to 2.0.2.6 and rechecked the procedure. The iLOM ip was successfully changed to the factory default ip. So, we suspect that the problem could be due to the new firmware. Similar Messages.

I have a WRT54G V8 router which I'm trying to set up as a wireless access point. I purchased it some time ago and flashed the firmware to version 8.00.2. I see there is a newer firmware version available, and I'm going to try flashing that to see if it helps, but wanted to ask here first.

The problem is that when I connect to the router using a web browser, I can see the administration pages, and even change most settings, but some settings just snap back to their previous values. For example, I go to Setup - Advanced Routing, and change Operating Mode from Gateway to Router. When I do, I see it changes to Router, then I see it talking to the HTTP server, and then it changes back to Gateway. This also happens in other areas, like trying to enable MAC address filtering - it won't let me enable it, and the Security Mode setting (under Wireless - Wireless Security) - It won't let me select WPA2 Personal, among others. Note that I've had this router for a while, but decided to change how it was configured today, so I started by pressing and holding the reset button for 5sec to reset it to factory defaults and went from there.

I'm assuming there must be some settings which are preventing these from taking, but I can't imagine any setting which should prevent me from enabling the MAC address filtering. Just in case this matters, I have the router connected to my in-home network using one of the 4 Ethernet ports, and don't have anything plugged into the Internet port.

Also, I have turned off the DHCP server, and assigned a static IP address to the router. This is the IP I'm using to connect to the router's administrative pages via a browser running on one of the other PCs on my in-home network.

The wireless access point is working, in that I can connect to my in-home network with my wireless client (laptop). Can anyone help me understand what I'm doing wrong? Thanks, Thanks, Yes, I did reset the router. Just to clarify: - I was having the problem where making changes to some settings would cause the settings to revert back to the original settings.

In fact, the settings would switch back before I would have a chance to click on the Save Settings button. Clicking on the button after the settings changed back, of course, saved the original setting. For example, I would click on a drop-down control to change a setting, see the browser communicate with the HTTP server, then the drop-down would just snap back to the original value. It wouldn't allow me to change it to a different value. I reset the router, including holding the reset button for 5 seconds to force a full-reset. This didn't help.

I attempted to update the firmware with the latest version for my router (yes, I double-checked that I had the correct version for my router/version). This failed with a strange message and required that I do another reset of the router.

It was after this failed attempt at the update that the problem went away. Now, I am able to change these particular settings and the changes stick. At this point, I updated the firmware to the latest version and it worked. After this, I am still able to make all the necessary setting changes and the router is performing as I need. Thanks for all the help,. i updated my phone and it deleted everything even the factory apps how do i get them back Default apps are part of the iOS and cannot be deleted. Search all home screens and all folders and/or search for it with Spotlight, that will tell you what folder it's in.

Also check Settings General Restrictions to see if it has been restricted. If not found, Settings General Reset Reset Home Screen Layout. Hello, I have a Sun Netra 240 server box that on every power up runs the max level POST which takes a good 5 minutes to complete. I have the power key switch set to the normal position and not DIAG mode and I have the Diag-level set to 'off' for the system configuration settings.

Nothing gets reported as an error during the POST but it still continues to run full POST on every power cycle. Can anyone tell me what else to check or look at to make it stop? Thanks in advance. I have no way to get a copy of this from the screen so I had to write it all down and hand jam it in. I only put my values, not the default values.

These have not been changed though so I don't think it is any of these settings. Just for some background this server has been fine for the past year or so and then one day it just started doing this out of the blue.

Test-args - diag-passes 1 asr-policy normal local-mac-address? True fcode-debug false silent-mode? False scsi-initiator-id 7 oem-logo - oem-logo? False oem-banner - oem-banner? False ansi-terminal true screen-#col 80 screen-#row 34 ttyb-rts-dtr-off false ttyb-ignore-cd true ttya-rts-dtr-off false ttya-ignore-cd true ttyb mode 9600,8,n,1,- ttya mode 9600,8,n,1,- output-device screen input-device keyboard auto-boot-on-error false load base 16384 auto-boot?

True boot-command boot diag-device disk use-NVRAMRC true security mode command NVRAMRC devalias radbkup security-#bad-logins 2 post-trigger power-on-reset diag-script none diag-level off diag-switch false obdiag-trigger power-on-reset error-reset-recovery boot Edited by: 941057 on Jun 15, 2012 2:38 PM. Having great difficulty trying to utilise the JMF API I've just downloaded with Sun One Studio v4, update 1 (community edition).

After installing the API, I tried copying the the.jar files under the lib folder of JMF to the lib folder of sun one studio. Although admittedly a novice in the field of adding API's I have attempted to add the.jar files into the libary of recognised modules but made no progress. The problem is that although JMF API is installed, Sun One Studio does not seem to be aware of this and so does not recognise any associated libraries e.g. Java.media or JMFApplet. I would appreciate advice from anyone who knows how to configure Sun One Studio to utilise the JMF API. Mark All right, I think I may have solved it.

After mounting jmf.jar I needed to update the parser database. All the libraries seem to be there. Can someone clarify though, the trial program i'm using makes reference to: java.media I don't have this module.

I do instead have javax.media which I believe includes all the methods of the java version. Am I right or am I missing this crucial module??. Hi all, can you please help to resolve this issue? In OM module Sales order form we have requestdate and schduleshipdate and they are some default rules are defined as sysdate for both the dates and thses should be effected once you save the form. Our requirement is schduleshipdate should not be updatable when we change a requestdate for the already existing sales order(SO). This can be achieved through form personalization.

Thanks & Regards maruthi Hi dgood76, Becoz there are so many personalizations and dff customizations are done on the form. If i remove the dependency is anything is effected. Thank & Regards maruthi. Hi all, can you please help to resolve this issue? In OM module Sales order form we have requestdate and schduleshipdate and they are some default rules are defined as sysdate for both the dates and thses should be effected once you save the form. Our requirement is schduleshipdate should not be updatable when we change a requestdate for the already existing sales order(SO). Thanks & Regards maruthi Duplicate.

Schduleshipdate should not be updatable when we change a requestdate. Pls help I am unable to purchase from AppStore for ipad3 in India.

I am unable to change country details in the credit card info while purchasing. If you still have problem, you can contact iTune Support. i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input. I have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input. I just updated my iphone 3GS last night and noticed the year date as being 2523 BE and am unable to change it back to 2010. I can change it back and forth a few years from 2523 BE but not able to roll down to 2010.

No other issues seen, iOS4.0 update wen through without any problems. Anyone else seeing this or have any ideas whats causing this? Cheers ozgazl Solved: I found out my calendar setting was set to Buddhist hence the '2553 BE' date.

I reverted back to Gregorian and all ok now. My phone hasnt gone dead after this either.

Topic closed. I had to change the Apple ID used for my iphone 4s. How do I change the Apple ID for the iCloud information? - the old Apple ID/password no longer exists and this information is requested to make a change. I am unable to change the Apple ID for the iCloud account. Apple IDs never go away, so it still exists.

But lets be clear. You actually stopped using an Apple ID and created a NEW Apple ID. You didn't just change the email address of your Apple ID?

That means that all of the music and apps purchased with the old Apple ID will have to be purchased again. If you really did create a new Apple ID you will need the password associated with the old one to disable Activation Lock. There is no way around this. As I said, the old one still exists.

You can use the standard tools to recover the password at. After update from ELOM to ILOM and during update of ILOM from 2.0.2.6 to 3.0.3.30, system shutdown, and no boot anymore. Turning on the system, later, I get the following erro, analysing the SP event log: ID = 29:: 15:46:11: System Firmware Error: sensor number = 0x00: BIOS corruption detected The SP had gracefull update, but BIOS seems to be corrupted. Any suggestions, please? How can I recover BIOS, or even, make the system work again? Bruno Simioni SOLVED Downgrading the SP and consecutively the BIOS, server is online again. Download SP and BIOS Firmware from Sun Fire X4150 & X4250 Software Supplemental 2.2.2, at Sunfire x4150 server downloads page, and, downgrade the 3.0.3.30 SP/BIOS to 2.2.2 version.

I really hope that an future version of 3.0 Tools and Drivers DVD makes Sunfire x4150 works fine. Hello, I just bought a Macmini 9 months ago, and I believe I may need to either erase the HD to reinstall the original Mac OS (10.4.10) or else replace it. However, I am not familiar with Mac and don't know how to reformat the disk. Can anyone help? Each time there is a software update, I experience problems starting up from the HD. After the last update a few days ago, I am unable to start up from the HD at all.

I tried using the original install CD 1 to reinstall Mac OS 10.4.10 with archiving. However, I received an error saying 'unable to install because there is a newer version already installed.' Therefore, I tried to start up from the HD again by pressing Option key at startup, but the Macmini continously turned off by itself without rebooting. I tried reinstalling Mac OS with the erase option, but it failed. After that, the Mac OS install CD1 only gives me the option to reinstall additional applications, but when I select continue, there is not HD shown to install the applications. Disk Utility First Aid on CD1 was unable to repair the disk.

I received the following messages: 'Invalid sibling link', 'Volume check failed', 'The underlying task reported failure on exit', '1 HFS volume checked', '1 volume could not be repaired because of an error.' At the bottom of the page under Disk Utility, the following information about the disk is available. Format: Mac OS Extended (Journaled); Capacity: 111.5 GB (119,690,149,888 Bytes); Available: -; Used: -; Number of Files: -; Owners Enabled: -; Number of Folders: -. System Profiler is able to identify type, disk identifier, file system, etc. It shows the volume supports journaling, but is not journaled. Scan Image for Restore shows LibraryPreferences (Empty), and Root applications are all grayed out.

I performed the Apple Hardware Test (ver 3A129) by pressing D at startup. The test ran for 5 minutes and 6 seconds. It reported 'No trouble found'. It seems the HD is empty, but the install CD is not offering any options to reinstall the OS, only the additional applications. I believe it is a partition error, but I am not familiar with Mac and hesitate to proceed any further. How do I reformat the disk so that I can reinstall the original Mac OS 10.4 and 10.5?

Your help is sincerely appreciated. The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot. You may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions. Some people get away without Repairing Permissions for years, some for only days. If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!

If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates. I only use Software Update to see what is needed, then get them for real via.

That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing. I have my Gmail account set up in BIS and everything is working perfectly, however, I am unable to change the 'Your name:' field to anything other than what's already there.

I've tried deleting the account and re-adding it in there from the web site as well as from my BB to no avail. When I change the field, I don't get an error and I receive a message saying 'Email account successfully updated.' But it doesn't stay.

For some reason, just my last name is in there (i.e. Smith) but I would like to change the 'Your name:' field to my full name: John Smith. Is there something I'm doing wrong? What did your mobile operator have to say about it? This seems to be a problem specific to them.

They can disable most of the fields your BIS account. WhackBerry. In any new or previously saved Pages documents, I am unable to view the font. I know the text is there, because when highlighted, the text shows as white, but I am unable to change it to any other color.

This has never been a problem before. Would this have something to do with not updating to iWork'09? Welcome to Apple Discussions If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky.

If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work. Maybe you are looking for. Hi Community, I am trying to copy queries from Info Cube to Multiprovider using RSZC, I got error called 'InfoObject 0MATERIAL0DIVISION missing from target InfoCube ZSCMIMM1' 'InfoObject 0MATERIALMATLCAT missing from targe.

is this a known issue? How do I fix it?. Greetings, I need some help from you good people. I have been tasked with preparing our video program for an SD Television Broadcast. In my many years of using Final Cut, I have never had to export for an official SD Broadcast. So I declare up front.

Sunfire X4150 Drivers For Mac Pro

Hi Gurus, can anybody please tell me is there a way in the system where we can block the GR against PO if there is an inbound delivery cretaed against that PO. So if the PO has an inbound delivery created in the confirmations tab, then during GR the.

Download Brother Printer Drivers For Mac

After enabling MPIO for ISCSI one of our HyperV Clustered Windows 2008 R2 Datacenter x64 servers has been unstable, crashing 3-5 times daily. I've had to take it out of service and after analyzing the dump file it seems there is an issue with msiscs.